Supports USA Panasonic Telephone Systems Only:

• KX-TDA50/100/200/600, KX-TDE100/200/600, KX-TAW848, KX-NCP500/1000

• KX-TD500, KX-TD1232, KX-TD816, KX-TD308

• KX-TA1232, KX-TA824, KX-TA624, KX-TA308

PanaLog WIN7 <part # PanaLog_WIN7>

• Computer Requirements(User Supplied)

  • USA Windows^® 7 Only!

  • USB Drive

  • 1GB RAM

  • 150MB free hard drive storage

  • 9-pin Serial Com Port (external USB to 9-pin serial also works)

  • United States Only 

Insure your Windows 7 PC is equipped with a Com Port, with the best solution being an internal serial Com Port that is compatible with Windows 7 and is configured as Com Port #1; or, Manufacturer product: GoldX, model 1200 USB to Serial 9-pin male external Com Port with the newest driver dated December 2009 (PL2303 Driver Installer v1.1.0 required) obtained from the GoldX website  for Windows 7. The GoldX 1200 product has been tested and works well for call collection on Windows 7 and PanaLog. PanaLog Company does not provide Com Port hardware or tech support assistance in configuring Com Ports. The Com Port is necessary to collect call data from your telephone system to your PC.

*PanaLog Software Serial Numbers Located On USB Device*

PanaLog Connection:

• A PanaLog SMDR cable kit is included in every software box and is already assembled for fast plug-in connection. Our cable kits will accommodate Panasonic KX-T, KX-TD, KX-TA, KX-TDA, KX-TDE, KX-NCP and KX-TAW telephone systems. The PanaLog SMDR Cable Kit provides a connection between your Panasonic Telephone System and your PC Com Port. This is how calls are transferred to your PC from your telephone system.

• PanaLog Software has the capability to work off a remote computer within the office. Extend your connection 300ft using a CAT5 data cable and plug it into the PanaLog adaptors! Your computer does not have to be located next to your telephone system. Collect the telephone data while sitting at your desk.